Messages regarding printing or adjustment
Use another paper.
.................................................................................................................................... 837
Cannot print as specified. .......................................................................................................................... 837
Borderless printng not possible. Paper stretched or shrank. .................................................................... 837
Before borderless printing, move the blue platen switch. .......................................................................... 838
Blue platen switch is dirty. ......................................................................................................................... 838
Use another paper.
Cause Corrective Action
The Printhead and feed amount cannot
be adjusted when highly transparent
film is loaded.
Press the Online button to clear the error.
We recommend using a type of paper that you often use, other than film,
for Printhead adjustment.
(See "Automatic Straightening of Lines and Colors (Auto Head
Adj.).") →P.627
Press the Online button to clear the error, and then adjust the feed
amount manually.
(See "Manual Band Adjustment (Manual Band Adj).")
→P.637
Cannot print as specified.
"Lift the release lever and replace paper with A4/LTR (vertical) or larger."
Cause Corrective Action
The loaded paper is too small. Switch to paper A4/Letter (vertical) or larger.
"Lift the release lever and replace roll with 10 in. wide or larger roll."
Cause Corrective Action
The loaded paper is too small. Load a roll 10 inches wide or larger.
Borderless printng not possible. Paper stretched or shrank.
Cause Corrective Action
The loaded roll has expanded or contracted due to envi-
ronmental conditions, making it wider or narrower than
the supported width for borderless printing.
Hold down the Stop button for a second or more to
cancel printing.
Use each type of paper only where the recommended
environmental conditions are met. For details on envi-
ronmental conditions for various paper, see the Paper
Reference Guide.
(See "Types of Paper.") →P.578
Error Message
>
Messages regarding printing or adjustment
>
iPF825 Use another paper.
13
837