1. This sets the BFormat for and C Paper Size.
Note
• The configuration method varies depending on the OS and application software you are using.
If Page
Setup is displayed in the application menu, the settings are configured by opening the
Page Attributes dialog box from Page Setup.
If it is not displayed, the settings are configured in the upper part of the printer driver displayed
when you select Print from the application software menu.
2. Select the printer in the APrinter list.
3. In
the F Paper Size list, choose a paper size supported for borderless printing. Here, click 10"x12" - Border-
less.
Note
• Paper sizes supported for borderless printing are indicated by —Borderless.
4. If
you configured the settings using the Page Attributes dialog box, click FOK to close the dialog box, and
then select Print from the application software menu.
Enhanced Printing Options
>
Printing at full size
>
iPF825 Borderless Printing at Actual Size (Mac OS X)
3
91
To Next Page
Loading...
