11. Make sure the width of the loaded roll is displayed in the BRoll Width list—in this case, 10 in. (254.0mm).
Note
• If
the width of the roll loaded in the printer is not shown in B Roll Width, click L Printer In-
formation on the Main pane to update the printer information.
12. Make sure the C Page Size setting matches the original size as selected in C Paper Size in the Page Attributes
dialog box—in this case, 10"x12".
13. On the Page Setup pane, select the DEnlarged/Reduced Printing check box.
14. Select the HBorderless Printing check box.
15. Click EFit Paper Size under D Enlarged/Reduced Printing.
16. In IPaper Size, click the paper size. In this case, click 10"x12" - Borderless.
Enhanced Printing Options
>
Borderless Printing
>
Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X) iPF825
3
100
To Next Page
Loading...
