5. Access the Main pane.
6. In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
7. Access the Page Setup pane.
8. Select and click a roll paper in the APaper Source list.
9. Make sure the width of the loaded roll is displayed in BRoll Width —in this case, ISO A3/A4 (297.0mm).
Note
• If
the width of the roll loaded in the printer is not shown in B Roll Width, click L Printer In-
formation on the Main pane to update the printer information.
Enhanced Printing Options
>
Conserving roll paper
>
Conserving Roll Paper by Rotating Originals 90 Degrees (Mac OS X) iPF825
3
162
To Next Page
Loading...
