3. Make sure the Main sheet is displayed.
4. In the AMedia Type list, select the type of paper that is loaded. In this case, click Plain Paper.
5. Click the Page Setup tab to display the Page Setup sheet.
6. In the A Page Size list,
click the size of the original as specified in the application. In this case, click ISO A4 or
Letter (8.5"x11").
7. Select and click a roll paper in the LPaper Source list.
8. Select the width of the loaded roll in the MRoll Paper Width list—in this case, ISO A3/A4 Roll (297.0mm).
Enhanced Printing Options
>
Conserving roll paper
>
iPF825 Conserving Roll Paper by Printing Originals Without Top and Bottom Margins (Windows)
3
165
To Next Page
Loading...
