Canon iPF825 - Page 511

Setting Details
Cut Sheet Select to print on the cut sheet.
Roll Paper 1 Select to print on the roll paper of Roll Paper 1 (Upper).
Roll Paper 2 Select to print on the roll paper of Roll Paper 2 (Lower).
Roll Paper Width
This selects the width of the roll media set to the printer.
Note
• Available only if rolls are selected in Paper Source.
Automatic Cutting
You can set the printer to cut roll paper automatically or print a guideline for cutting.
The following settings are available for automatic cutting.
Setting Details
Printer Default The value set on the printer operation panel takes priority.
None Each page is not cut after it is printed and printing continues without interrup-
tion.
Print Cut Guideline A print cut guideline is printed after each page and printing continues without
interruption.
Note
• Available only if rolls are selected in Paper Source.
Copies
You can input the number of print copies in numerical characters.
Note
• The maximum value is 999.
• You can change the numbers by clicking either ▲ button or ▼ button.
Mac OS X Software
> Color imageRUNNER Enlargement Copy >
iPF825 Paper Settings Panel
5
495