Paper Size
You can select the size of the print media.
Note
• This is not displayed when Fit Roll Paper Width is set in Enlarged/Reduced Printing.
Print Centered
Select this feature to print the image in the center of a cut sheet or to print left and right margins evenly from the edges
of roll paper.
Note
• This feature is useful when you print the document enlarged or reduced with Scaling as well. When an
image is scaled, it is always enlarged or reduced in reference to a starting point in the upper left corner of
the page. If the image is reduced, the bottom and right margins are enlarged and the top and left margins
remain unchanged. At that point, you can set all margins evenly with this feature.
No Spaces at Top or Bottom
You can set the printer to print without any empty area when the print data contains empty area at the top or bottom.
Since the printer does not feed paper over the empty area, you can save paper.
Note
• Available only if rolls are selected in Paper Source.
Rotate Page
Select the method for rotating page.
The following settings are available for rotating page.
Setting Details
Rotate Right 90 Degrees Rotates the portrait page right 90 degrees and print in landscape orientation.
When the rotated page can fit in the width of roll paper, the page is rotated auto-
matically, and when it can not fit in the width of roll paper, the page is not rota-
ted.
*When Fit Roll Paper Width is selected under Enlarged/Reduced Printing,
then the image is enlarged or reduced after rotating to fit the width of the roll
paper.
Rotate Left 90 Degrees Rotates the portrait page left 90 degrees and print in landscape orientation.
When the rotated page can fit in the width of roll paper, the page is rotated auto-
matically, and when it can not fit in the width of roll paper, the page is not rota-
ted.
*When Fit Roll Paper Width is selected under Enlarged/Reduced Printing,
then the image is enlarged or reduced after rotating to fit the width of the roll
paper.
Rotate 180 degrees Allows you to rotate the image 180 degrees from the vertical to the right.
Note
• Available only if rolls are selected in Paper Source.
Output Method Button
Click the button to open the Output Method dialog box.
In this dialog box, you can specify the object output method.
Mac OS X Software
>
Color imageRUNNER Enlargement Copy
>
Output Settings Panel iPF825
5
500
To Next Page
Loading...
