Caution
• Be careful not to pinch your fingers between the Roll Holder shaft (a) and the guide grooves (b)
when loading rolls.
Note
• For
instructions on attaching the Roll Holder to rolls, see "Attaching the Roll Holder to Rolls."
→P.584
4. Pull
out the roll evenly on both ends and insert it in the Paper Feed Slot (a). Advance the roll until the buzzer
sounds.
Important
• Be
careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect
the printing quality. We recommend wearing clean cloth gloves when handling rolls to protect the
printing surface.
• If the paper is wrinkled or warped, straighten it out before loading it.
• Load the roll so that there is no gap between the right edge of the paper and the Roll Holder.
Handling Paper
>
Handling rolls
>
iPF825 Loading Rolls in the Printer
7
593
To Next Page
Loading...
