Setting Item Description, Instructions
(The type of paper is dis-
played here.)
(*1 →P.682 )
NearEnd RollMrgn Note that if you choose 3mm, it may lower the printing
quality at the leading edge and affect feeding accuracy.
The printed surface may be scratched, and ink may ad-
here to the leading edge. It may also cause the Platen to
become soiled.
Cut Speed Choose the cutting speed. If you use adhesive paper,
choosing Slow helps prevent adhesive from sticking to
the cutter and keeps the cutter sharp.
Trim Edge First If a roll is loaded, the end of the paper will be cut.
Cutting Mode Specify whether or not to cut with the standard round-
bladed cutter.
Choose Automatic to have the roll cut automatically af-
ter printing. If you choose Manual, the paper will not
be cut after printing. Instead, a line will be printed at the
cut position.
Choose Eject if you prefer not to have documents drop-
ped immediately after printing, as when waiting for ink
to dry.
Bordless Margin Adjust the margin during borderless printing.
Choose Automatic to have the printer automatically de-
tect the paper width and configure the margin settings
for borderless printing. If margins are mistakenly cre-
ated when Automatic is selected, choose Fixed. In this
case, the paper width is not detected automatically, and
the document is printed without borders, using the mar-
gin settings required by the printer.
CutDustReduct. If you choose On, a line will be printed at the cut posi-
tion when paper cutting is selected. This option reduces
the amount of debris given off after cutting. It also helps
prevent adhesive from sticking to the cutter and keeps
the cutter sharp if you use adhesive paper. (See "Re-
ducing Dust from Cutting Rolls.") →P.612
NearEnd Sht Mrgn Specify a margin at the leading edge of sheets to ensure
better printing quality at the leading edge.
Note that if you choose 3mm, it may lower the printing
quality at the leading edge and affect feeding accuracy.
The printed surface may be scratched, and ink may ad-
here to the leading edge.
Return Defaults Choose Yes to restore Paper Details to the default val-
ues.
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Types
of Paper.") →P.578 The types of paper indicated in the printer driver and related software (as well as on
the Control Panel ) are updated when you install the printer driver from the User Software CD-ROM or if
you update paper information by using the Media Configuration Tool.
Job Management
Setting Item Description, Instructions
Print
Job
Job
List
(Choo
se a
print
job)
Delete Delete the current job or queued jobs. (See "Managing
Queued Jobs (Deleting or Preempting Other Jobs).")
→P.535
Preempt Jobs Print the job first after the current print job is finished.
(See "Managing Queued Jobs (Deleting or Preempting
Other Jobs).") →P.535
Printer Parts
>
Control Panel
>
Main Menu Settings iPF825
9
682
To Next Page
Loading...
