11. Make
sure the width of the loaded roll is displayed in the B Roll Width list—in this case, ISO A2/A3
(420.0mm).
Note
• If
the width of the roll loaded in the printer is not shown in B Roll Width, click L Printer In-
formation on the Main pane to update the printer information.
12. Make sure C Page Size on the Page Setup pane shows the original size as specified in CPaper Size in the
Page Attributes dialog box—in this case, ISO A4.
13. Select the DEnlarged/Reduced Printing check box.
14. Make sure EFit Paper Size is selected.
15. Click ISO A3 in the IPaper Size list.
Enhanced Printing Options
>
Printing enlargements or reductions
>
iPF825 Resizing Originals to Match the Paper Size (Mac OS X)
3
67
To Next Page
Loading...
