14. Click GScaling and enter 120.
Note
• You
can specify enlargement that exceeds the paper size, but in this case, the portion off the edge
of the paper will not be printed.
• If the original size after enlargement or reduction is smaller than the paper size, the original is
printed in the upper-left corner. In this case, you can center originals by selecting the J Print
Centered check box.
15. Confirm the print settings, and then click MPrint to start printing.
Note
• For tips on confirming print settings, see "Confirming Print Settings (Mac OS X) →P.407 "
Enhanced Printing Options
>
Printing enlargements or reductions
>
Resizing Originals by Entering a Scaling Value (Mac OS X) iPF825
3
80
To Next Page
Loading...
