D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
997
DGS-3120-24TC:admin# config sim dp_interval 30
Command: config sim dp_interval 30
Success.
DGS-3120-24TC:admin#
To change the hold time of discovery protocol:
DGS-3120-24TC:admin# config sim hold_time 200
Command: config sim hold_time 200
Success.
DGS-3120-24TC:admin#
102-7 download sim_ms
Description
This command is used to download firmware or configuration to indicated device.
Format
download sim_ms [firmware_from_tftp | configuration_from_tftp] <ipaddr> <path_filename>
{[members <mslist 1-32> | all]}
Parameters
firmware_from_tftp - Specify that the firmware will be downloaded from the TFTP server.
configuration_from_tftp - Specify that the configuration will be downloaded from the TFTP
server.
<ipaddr> - Specify the IP address of the TFTP server.
<path_filename> - Specify the file path of the firmware or configuration in the TFTP server.
members - (Optional) Specify a range of members who can download this firmware or
configuration.
<mslist 1-32> - Enter the member list used here. This value must be between 1 and 32.
all - (Optional) Specify that all members will be used.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To download configuration:

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)