D-Link xStack DGS-3120 Series - Page 1003

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
998
DGS-3120-24TC:admin#download sim_ms configuration_from_tftp 10.55.47.1
D:\dwl600x.tfp members 1
Command: download sim_ms configuration_from_tftp 10.55.47.1 D:\dwl600x.tfp
members 1
This device is updating configuration. Please wait several minutes ...
Download Status :
ID MAC Address Result
--- ----------------- ----------------
1 00-01-02-03-04-00 Success
DGS-3120-24TC:admin#
To download firmware:
DGS-3120-24TC:admin#download sim_ms firmware_from_tftp 10.55.47.1 D:\test.txt
members 1
Command: download sim_ms firmware_from_tftp 10.55.47.1 D:\test.txt members 1
This device is updating firmware. Please wait several minutes ...
Download Status :
ID MAC Address Result
--- ----------------- ----------------
1 00-01-02-03-04-00 Success
DGS-3120-24TC:admin#
102-8 upload sim_ms
Description
This command is used to upload configuration to TFTP server.
Format
upload sim_ms [configuration_to_tftp | log_to_tftp] <ipaddr> <path_filename> {[members
<mslist> | all]}
Parameters
configuration_to_tftp - Specify that the configuration will be uploaded to the TFTP server.
log_to_tftp – Specify that the log file will be uploaded to the TFTP server.
<ipaddr> - Specify the IP address of the TFTP server.
<path_filename> - Specify the file path to store the configuration in the TFTP server.
members - (Optional) Specify a range of members who can up this configuration.
<mslist> - Enter the member list used here.
all - (Optional) Specify that all members will be used.