D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1112
DGS-3120-24TC:admin#config wred ports 1:1 cos 2 profile profile_id 2
Command: config wred ports 1:1 cos 2 profile profile_id 2
Success.
DGS-3120-24TC:admin#
121-6 delete wred profile
Description
This command is used to delete a WRED profile.
Format
delete wred profile [profile_id <int 2-128> | <profile_name 32> |all]
Parameters
profile_id - Specify the profile ID to be deleted.
<int 2-128> - Enter the profile ID between 2 and 128.
<profile_name 32> - Specify the profile name to be delete.
all - Specify all profiles to be delete.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete the profile 2:
DGS-3120-24TC:admin#delete wred profile all
Command: delete wred profile all
Success.
DGS-3120-24TC:admin#
121-7 show wred
Description
This command is used to display the WRED port information.
Format
show wred {ports {<portlist>}}
Parameters
ports - (Optional) Specify a range of ports.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)