D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1113
<portlist> - (Optional) Enter a range of ports.
Restrictions
None.
Example
To display wred of port 1:1 and 1:2 settings:
DGS-3120-24TC:admin#show wred ports 1:1-1:2
Command: show wred ports 1:1-1:2
Global WRED : Disabled
Port: 1:1
Class_ID Weight Profile_id Profile_Name
-------- ------ ---------- ------------
0 9 1 default
1 9 1 default
2 2 2 profilename
3 9 1 default
4 9 1 default
5 9 1 default
6 9 1 default
7 9 1 default
Port: 1:2
Class_ID Weight Profile_id Profile_Name
-------- ------ ---------- ------------
0 9 1 default
1 9 1 default
2 9 1 default
3 9 1 default
4 9 1 default
5 9 1 default
6 9 1 default
7 9 1 default
DGS-3120-24TC:admin#
121-8 show wred profile
Description
This command is used to display the WRED profile information.
Format
show wred profile {[ default | profile_id <int 2-128> | <profile_name 32>]}

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)