D-Link xStack DGS-3120 Series - Page 179

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
174
DGS-3120-24TC:admin#enable bpdu_protection
Command: enable bpdu_protection
Success.
DGS-3120-24TC:admin#
13-5 disable bpdu_protection
Description
This command is used to disable BPDU protection function globally for the Switch.
Format
disable bpdu_protection
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable bpdu_protection function globally for the entire switch:
DGS-3120-24TC:admin#disable bpdu_protection
Command: disable bpdu_protection
Success.
DGS-3120-24TC:admin#
13-6 show bpdu_protection
Description
This command is used to display BPDU protection global configuration or per port configuration
and current status.
Format
show bpdu_protection {ports {<portlist>}}
Parameters
ports - Specified a range of ports to be configured.
<portlist> - Enter the portlist here.