D-Link xStack DGS-3120 Series - Page 230

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
225
2 204 204 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0
6 0 0 0 0 0 0 0 0
7 0 0 0 0 0 0 0 0
8 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0
10 0 0 0 0 0 0 0 0
11 0 0 0 0 0 0 0 0
12 0 0 0 0 0 0 0 0
CFM TX Statistics
-----------------------------------------------------------
Port AllPkt CCM LBR LBM LTR LTM
----- -------- -------- -------- -------- -------- --------
all 3988 3984 0 0 0 4
1 0 0 0 0 0 0
2 204 204 0 0 0 4
3 578 578 0 0 0 0
4 578 578 0 0 0 0
5 578 578 0 0 0 0
6 578 578 0 0 0 0
7 578 578 0 0 0 0
8 578 578 0 0 0 0
9 578 578 0 0 0 0
10 578 578 0 0 0 0
11 578 578 0 0 0 0
12 578 578 0 0 0 0
DGS-3120-24TC:admin# show cfm pkt_cnt ccm
Command: show cfm pkt_cnt ccm
CCM RX counters:
XCON = Cross-connect CCMs
Error = Error CCMs
Normal = Normal CCMs
MEP Name VID Port Level Direction XCON Error Normal
----------- ---- ----- ----- --------- ---------- ---------- ----------
mep1 1 1 2 inward 9 8 100
mep2 1 2 2 inward 9 8 100
mep3 1 3 2 inward 9 8 100
-----------------------------------------
Total: 27 24 300
DGS-3120-24TC:admin#
19-26 clear cfm pkt_cnt
Description
This command is used to clear the CFM packet’s RX/TX counters.