D-Link xStack DGS-3120 Series - Page 279

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
274
Format
debug ospf show log state
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display the OSPF debug log state:
DGS-3120-24TC:admin#debug ospf show log state
Command: debug ospf show log state
OSPF Log State: Enabled
DGS-3120-24TC:admin#
22-38 debug ospf show redistribution (RI Mode Only)
Description
This command is used to display the current internal OSPF redistribute list.
Format
debug ospf show redistribution
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display the current OSPF redistribution list: