D-Link xStack DGS-3120 Series - Page 280

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
275
DGS-3120-24TC:admin#debug ospf show redistribution
Command: debug ospf show redistribution
OSPF Redistribution List:
IP Nexthop State Type Tag
------------------ --------------- ----- ---- ---------------
1.1.1.0/24 0.0.0.0 ON 2 0.0.0.0
OSPF ASE Table:
IP Nexthop State Type Tag
------------------ --------------- ----- ---- ---------------
1.1.1.0/24 0.0.0.0 ON 2 0.0.0.0
DGS-3120-24TC:admin#
22-39 debug ospf show request_list (RI Mode Only)
Description
This command is used to display the current internal OSPF request list.
Format
debug ospf show request_list
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display the current OSPF request list: