D-Link xStack DGS-3120 Series - Page 281

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
276
DGS-3120-24TC:admin#debug ospf show request_list
Command: debug ospf show request_list
OSPF Request List:
Area 0.0.0.0:
Circuit: 1.1.1.1
Neighbor: 90.2.0.1 IP: 1.1.1.2
LSID: 192.194.134.0 RTID: 90.2.0.1
LSID: 192.194.135.0 RTID: 90.2.0.1
LSID: 192.194.136.0 RTID: 90.2.0.1
LSID: 192.194.137.0 RTID: 90.2.0.1
LSID: 192.194.138.0 RTID: 90.2.0.1
DGS-3120-24TC:admin#
22-40 debug ospf show summary_list (RI Mode Only)
Description
This command is used to display the current internal OSPF summary list.
Format
debug ospf show summary_list
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display the current OSPF summary list: