D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
340
Parameters
enable - Enable the log function.
disable - Disable the log function.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the log function.
DGS-3120-24TC:admin#config filter dhcp_server log disable
Command: config filter dhcp_server log disable
Success.
DGS-3120-24TC:admin#
27-4 config filter dhcp_server trap
Description
This command is used to enable or disable the log function.
Format
config filter dhcp_server trap [enable | disable]
Parameters
enable - Enable the trap function.
disable - Disable the trap function.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the trap function.
DGS-3120-24TC:admin#config filter dhcp_server trap disable
Command: config filter dhcp_server trap disable
Success.
DGS-3120-24TC:admin#

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)