D-Link xStack DGS-3120 Series - Page 485

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
480
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the ND snooping function on the switch:
DGS-3120-24TC:admin#disable address_binding nd_snoop
Command: disable address_binding nd_snoop
Success.
DGS-3120-24TC:admin#
43-21 config address_binding nd_snoop ports
Description
This command is used to specify the maximum number of entries that can be learned with ND
snooping. By default, there is no limit on the maximum number of entries that can be learned on a
port with ND snooping.
Format
config address_binding nd_snoop ports [<portlist> | all] max_entry [< value 1-50 > | no_limit]
Parameters
ports - Specify the list of ports used for this configuration.
<portlist> - Enter the list of ports used for this configuration here.
all - Specify that all the ports will be usd for this configuration.
max_entry - Specify the maximum number of entries.
<value 1-50> - Enter the maximum number of entries used here. This value must be between
1 and 50.
no_limit - Specify that the maximum number of learned entries is unlimited.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To have a maximum of 10 entries can be learned by ND snooping on ports 1:1 to 1:3: