D-Link xStack DGS-3120 Series - Page 486

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
481
DGS-3120-24TC:admin#config address_binding nd_snoop ports 1:1-1:3 max_entry 10
Command: config address_binding nd_snoop ports 1:1-1:3 max_entry 10
Success.
DGS-3120-24TC:admin#
43-22 show address_binding nd_snoop
Description
This command is used to display the status of ND snooping on the Switch.
Format
show address_binding nd_snoop {ports <portlist>}
Parameters
ports – (Optional) Specify the list of ports used for this display.
<portlist> - Enter the list of ports used for this display here.
Restrictions
None.
Example
To show the ND snooping state:
DGS-3120-24TC:admin#show address_binding nd_snoop
Command: show address_binding nd_snoop
ND Snoop : Enabled
DGS-3120-24TC:admin#
To show the ND snooping maximum entry information for ports 1:1-1:5:
DGS-3120-24TC:admin#show address_binding nd_snoop ports 1:1-1:5
Command: show address_binding nd_snoop ports 1:1-1:5
Port Max Entry
---- ---------
1:1 10
1:2 10
1:3 10
1:4 No Limit
1:5 No Limit
DGS-3120-24TC:admin#