D-Link xStack DGS-3120 Series - Page 499

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
494
Example
To delete an access list named by “list1”:
DGS-3120-24TC:admin#delete ip standard access_list list_name list1
Command: delete ip standard access_list list_name list1
Success.
DGS-3120-24TC:admin#
45-4 show ip standard access_list
Description
This command is used to display the information of an access list.
Format
show ip standard access_list {<list_name 16>}
Parameters
<list_name16> - (Optional) Enter the name of the access list.
Restrictions
None.
Example
To display the information of an access list named “list1”:
DGS-3120-24TC:admin#show ip standard access_list list1
Command: show ip standard access_list list1
IP standard Access_list: list1
Total entries number : 1
filter : permit 10.10.10.0/24
DGS-3120-24TC:admin#
45-5 create route_map
Description
This command is used to create a route map.
Format
create route_map <map_name 16>