D-Link xStack DGS-3120 Series - Page 821

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
816
disable - Specify to disable embedded RP support in PIM6.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the embedded RP state:
DGS-3120-24TC:admin#config pim6 embedded_rp state enable
Command: config pim6 embedded_rp state enable
Success.
DGS-3120-24TC:admin#
81-18 show pim6 crp
Description
This command is used to display all candidate rendezvous point (C-RP) related information.
Format
show pim6 crp
Parameters
None.
Restrictions
None.
Example
To show C-RP information:
DGS-3120-24TC:admin#show pim6 crp
Command: show pim6 crp
PIM6 Candidate-RP Table
Group Interface Priority Interval
------------------------------------------- ------------ -------- --------
ff1e::/64 System 192 60
Total Entries : 1
DGS-3120-24TC:admin#