D-Link xStack DGS-3120 Series - Page 822

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
817
81-19 show pim6 static_rp
Description
This command is used to display all static RP settings.
Format
show pim6 static_rp
Parameters
None.
Restrictions
None.
Example
To show the static RP:
DGS-3120-24TC:admin#show pim6 static_rp
Command: show pim6 static_rp
PIM6 Static RP Table
-----------------------------------
Group : FF02::/64
RP Address : 3000::12
Override Dynamic : False
Total Entries: 1
DGS-3120-24TC:admin#
81-20 show pim6 rpset
Description
This command is used to display all the active RP information.
Format
show pim6 rpset
Parameters
None.