D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
897
92-7 delete execute_config
Description
This command is used to delete the schedule of executing configuration.
Format
delete execute_config [all | time_range <range_name 32> {config <pathname>}]
Parameters
all - Delete all the schedules of executing configuration.
time_range - The time range of the schedules that execute configuration to be deleted.
<range_name 32> - Enter the time range to be deleted. Maximum 32 characters.
config - (Optional) The configuration file name on file system.
<pathname> - Enter the configuration file path name.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete all the schedule of executing configuration:
DGS-3120-24TC:admin# delete execute_config all
Command: delete execute_config all
Success.
DGS-3120-24TC:admin#
92-8 show execute_config
Description
This command is used t o display all the executive schedules.
Format
show execute_config
Parameters
None.
Restrictions
None.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)