Impact of the write access protection on Emotron Easy starter« functions
The following »Emotron Easy starter« functions are not supported when write access
protection is active:
• Parameter set download
• Definition of the "Favorites" parameters.
• Definition of the parameters for the "Parameter change-over" function
The following »Emotron Easy starter« functions are supported irrespective of whether
write access protection is active:
• Optical device identification 0x2021:001 (P230.01)
• Enable/inhibit inverter 0x2822:001
• Reset parameters to default 0x2022:001 (P700.01)
• Save parameter set 0x2022:003 (P700.03)
• Load user parameter 0x2022:004 (P700.04)
• Load OEM parameter 0x2022:005 (P700.05)
• Reset error 0x2631:004 (P400.04)
To Next Page
Loading...
