Emotron VS10 - Page 358

358 01-6203-01R3, CG Drives & Automation
Parameter
Name / value range / [default setting]
Info
0x4030:008
(P830.08)
Sequence 1: Step 8
(Sequence 1: Step 8)
For further possible settings, see parameter
0x4030:001 (P830.01).

340
0 Skip step
0x4030:009
(P830.09)
Sequence 1: Step 9
(Sequence 1: Step 9)
For further possible settings, see parameter
0x4030:001 (P830.01).  340
0
Skip step
0x4030:010
(P830.10)
Sequence 1: Step 10
(Sequence 1: Step 10)
For further possible settings, see parameter
0x4030:001 (P830.01).  340
0
Skip step
0x4030:011
(P830.11)
Sequence 1: Step 11
(Sequence 1: Step 11)
For further possible settings, see parameter
0x4030:001 (P830.01).  340
0
Skip step
0x4030:012
(P830.12)
Sequence 1: Step 12
(Sequence 1: Step 12)
For further possible settings, see parameter
0x4030:001 (P830.01).

340
0
Skip step
0x4030:013
(P830.13)
Sequence 1: Step 13
(Sequence 1: Step 13)
For further possible settings, see parameter
0x4030:001 (P830.01).

340
0
Skip step
0x4030:014
(P830.14)
Sequence 1: Step 14
(Sequence 1: Step 14)
For further possible settings, see parameter
0x4030:001 (P830.01).

340
0
Skip step
0x4030:015
(P830.15)
Sequence 1: Step 15
(Sequence 1: Step 15)
For further possible settings, see parameter
0x4030:001 (P830.01).  340
0
Skip step
0x4030:016
(P830.16)
Sequence 1: Step 16
(Sequence 1: Step 16)
For further possible settings, see parameter
0x4030:001 (P830.01).  340
0
Skip step
0x4031
(P831.00)
Number of cycles sequence 1
(Cycl. sequence 1)
1 ... [1] ... 65535
From version 03.00
Definition of how often the sequence 1 is to be passed through.
1 = one pass, 2 = two passes, ...
65535 = infinite number of cycles.
0x4032:001
(P835.01)
Sequence 2: Step 1
(Sequence 2: Step 1)
Configuration of the steps 1 ... 16 for sequence 2.
Alternatively to calling a single segment, a complete sequence (with a
higher number) can also be called from one step. This, for instance,
serves to configure a main sequence from which several
subsequences are called successively.
With the setting "0", the respective step is skipped.
-8
Sequence 8
-7
Sequence 7
-6 Sequence 6
-5
Sequence 5
-4
Sequence 4
-3
Sequence 3
0
Skip step
1 Segment 1