Emotron VS10 - Page 373

Parameter
Name / value range / [default setting]
Info
0x4040
(P820.00)
Start of sequence mode
(StartOfSeq. mode)
From version 03.00
Selection of the action after the motor has been stopped and restarted
or after the motor has been restarted after an error occurred.
0
Restart sequencer
The currently selected sequence is restarted.
1
Restart current segment
The current segment of the selected sequence is restarted.
2
Continue current segment
The current segment of the selected sequence is continued (just like
after a break).
3 Start next segment The next segment of the selected sequence is started.
4
No action
For debugging purposes: The sequence is continued to be processed
(including output states) even if the motor is stopped.
Related topics
 Sequencer control functions  416
 Sequencer diagnostics  80