Emotron VS10 - Page 38

38 01-6203-01R3, CG Drives & Automation
Example: parameters with a bit-coded display
Parameter
Name / value range / [default setting]
Info
Index:Subindex
(display code)
Parameter designation
(abbreviated keypad designation)
•
Optional information with regard to the parameter.
Explanations & notes with regard to the parameter.
Bit 0 Designation of bit 0 Optionally: Explanations & notes with regard to the corresponding bit.
Bit 1
Designation of bit 1
Bit 2
Designation of bit 2
...
...
Bit 15
Designation of bit 15
Parameter overview lists in this documentation
•
Keypad parameter list: for the parameterisation using the keypad, contains a list of all
parameters which can also be accessed by means of the keypad.
 38
• Parameter attribute list: contains a list of all inverter parameters. This list in particular
includes some information that is relevant for the reading and writing of parameters
via the network.
 464