Fuji Xerox Phaser 5500 User Manual

General Information 1-11
Printer Specifications
Physical Dimensions
Memory Specifications
Operational Clearances
Device Height Width Depth Weight
Print Engine 498 mm (19.6 in.) 640 mm (25.2 in.) 525 mm (20.7 in.) 41 kg (90 lbs.)
Duplex Unit 211 mm (8.3 in.) 64 mm (2.52 in.) 458 mm (18.0 in.) 1.8 kg (4 lbs.)
1000-Sheet
Feeder
280 mm (11.0 in.) 540 mm (21.2 in.) 520 mm (21.1 in.) 23 kg (50 lbs.)
Stacker/
Finisher
1050 mm
(41.3
in.)
740 mm (29.1 in.) 650 mm (25.6 in.) 49 kg
(108
lbs.)
Exit 2 142 mm (5.6 in.) 130 mm (5.1 in.) 460 mm (18.1 in.) 2 kg (4.4 lbs.)
Envelope Tray 76 mm (3.0 in.) 538 mm (21.2 in.) 521 mm (20.5 in.) 3.2 kg (7 lbs.)
2000-Sheet
Feeder
363 mm (14.3 in.) 385.5 mm
(15.1
in.)
600 mm (23.6 in.) 50 kg
(110
lbs.)
Characteristic Specification
Minimum RAM 128 MB
Maximum RAM 512 MB
Supported RAM SO-DIMM 144-pin module of 128 or 256 MB. All combinations are allowed
for configurations of 128, 256, 384, and 512 MB.
NVRAM Single chip of either PPROM or StrataFlash 16 MB
Clearance Specification
Top 890 mm (35.0 in.)
Left 640 mm (25.2 in.)
Right 200 mm (7.9 in.), 1000 mm (39.4 in.) with Finisher
Front 460 mm (18.1 in.)
Rear 200 mm (7.9 in.)
Height
requirement
1190 mm (47.0 in.)

Fuji Xerox Phaser 5500 Specifications

General

Brand	Fuji Xerox
Model	Phaser 5500
Category	Printer
Language	English