Fuji Xerox Phaser 5500 User Manual

6-10 Phaser 5500 Printer Service Manual
Resetting Connection Setup Values
Resetting the connection setup values resets the Printer Name, TCP/IP address, TCP/
IP address menu settings (gateway, broadcast, etc.), CentreWare IS, EtherTalk,
NetWare, set IPX frame type, IPP, and Ethernet speed to their default values.
Caution
Before resetting the connection setup values to factory default values, make note
of the current network settings or print a Configuration Page to record the
printer’s current network settings.
1. From the Main menu, select Printer Setup, then press the OK button.
2. Select Connection Setup, then press the OK button.
3. Select Reset Connection Setup, then press the OK button.
4. Select Reset Connection Setup NOW, then press the OK button.
Resetting Paper Handling Setup Values
Resetting the paper handling setup values resets the default paper source, 2-sided
printing, tray setup (default paper type/size), load paper timeout, tray sequence, tray
prompt, custom size paper units, default paper destination, job offset, output tray
switch, fuser temperature configuration, and reprint jammed pages settings.
1. From the Main menu, select Printer Setup, then press the OK button.
2. Select Paper Handling Setup, then press the OK button.
3. Select Reset Paper Handling Setup, then press the OK button.
4. Select Reset Paper Handling Setup NOW, then press the OK button.
Resetting PostScript Setup Values
Resetting the PostScript setup values resets the PostScript Error Info, Image
Smoothing, and Edge-to-Edge Printing settings.
1. From the Main menu, select Printer Setup, then press the OK button.
2. Select PostScript Setup, then press the OK button.
3. Select Reset PostScript Setup, then press the OK button.
4. Select Reset PostScript Setup NOW, then press the OK button.

Fuji Xerox Phaser 5500 Specifications

General

Brand	Fuji Xerox
Model	Phaser 5500
Category	Printer
Language	English