Print-Quality Troubleshooting 5-9
Registration (Side to Side)
Side to Side (Scan Direction) Registration Troubleshooting Procedure
Actions and Questions Yes No
Measure the registration on two consecutive test prints:
1. Fold the paper in half (side to side).
2. Observe the fold line of the paper with reference to the
cross hairs of the target.
Is the fold within +/- 2.0 mm of the target cross hairs
(each line on the target is 1 mm).
The printed
test patterns
meet the Side
to Side
Registration
Specification.
Go to
"Skewed
Image" on
page 5-44.
Go to
"Registration"
on page 5-45.
s5500-052
To Next Page
Loading...
