Fuji Xerox Phaser 5500

Reference A-21
Exit 2 Solenoid/Clutch Test Menu
Activates the Exit 2 Gate Solenoid. The clicking made by the solenoid when
energized indicates its condition.
Tray 4 & 5 Solenoid/Clutch Test Menu
Activates the Take Away Clutch. The clicking made by the clutch when energized
indicates its condition.
Tray 6 Solenoid/Clutch Test Menu
Tests the functionality of the optional Tray 6 solenoid.
Finisher Solenoid/Clutch Tests Menu
Activates the selected clutch or solenoid. The clicking made by the part when
energized indicates its condition
Exit 2 Solenoid Test
Test Action / Requirement
Exit Gate Solenoid Energize the Exit Gate Solenoid. This test runs with Door E open.
Tray 4 & 5 Clutch Test
Test Action / Requirement
Take Away Clutch Energize the Take Away Clutch on the optional tray module.
Tray 6 Solenoid/Clutch Tests
Test Action / Requirement
Nudger (High Power) Energize the Nudger Solenoid at high power.
Nudger (Low Power) Energize the Nudger Solenoid at low power.
Finisher Solenoid/Clutch Tests
Test Action / Requirement
Buffer Gate Solenoid
(path out)
Energize the Buffer Gate Solenoid moving the Buffer Gate to direct
paper over the Buffer Roller.
Buffer Gate Solenoid
(path-in)
Energize the Buffer Gate Solenoid moving the Buffer Gate to direct
paper into the Buffer Path.