Print-Quality Troubleshooting 5-5
Deletions (Line, Band, Spots)
Line, Band, or Spot Deletions
Note
The specified operating environment for the printer ranges from 41 degrees F
(5
degrees C) at 15% relative humidity to 95 degrees F (32 degrees C) at 85%
relative humidity. Fusing performance varies according to the environment.
Line, Band or Spot Deletions Troubleshooting Procedure
Step Actions and Questions Yes No
1
Inspect the test print for the presence of deletions
(missing image). There should be no deletions with a
diameter larger than 0.5 mm visible on test prints.
Are there deletions on the test prints?
Go to Step 2. Go to
"Fusing" on
page 5-6.
2
Are there vertical (in process direction) Line/
Band deletions present?
Go to
"Vertical
Deletions" on
page 5-21.
Go to Step 3.
3
Are there Horizontal (in direction of scanning)
Line/Band Deletions present?
Go to
Horizontal
Deletions on
page 5-23.
Go to Step 4.
4
Are there Spot Deletions present? Go to "Spot
Deletions" on
page 5-35.
Go to
"Fusing" on
page 5-6.
s5500-048
To Next Page
Loading...
Need help?
General
