Fuji Xerox Phaser 5500 User Manual

Adjustments and Calibrations 6-11
Resetting PCL Setup Values
Resetting the PCL Setup values resets the default font number, pitch, point size,
symbol set, orientation, form length, line termination character, and Edge-to-Edge
Printing settings.
1. From the Main menu, select Printer Setup, then press the OK button.
2. Select PCL Setup, then press the OK button.
3. Select Reset PCL Setup, then press the OK button.
4. Select Reset PCL Setup NOW, then press the OK button.
Resetting General Setup Values
Resetting the General setup values resets the Print-Quality Mode, Print Quantity, and
Print with Low Toner settings.
1. From the Main menu, select Printer Setup, then press the OK button.
2. Select General Setup, then press the OK button.
3. Select Reset General Setup, then press the OK button.
4. Select Reset General Setup NOW, then press the OK button.
Resetting Front Panel Setup Values
Resetting the Front Panel values resets the Front Panel Language, Front Panel
Brightness, Front Panel Contrast, and Accessible Front Panel settings.
1. From the Main menu, select Printer Setup, then press the OK button.
2. Select Front Panel Setup, then press the OK button.
3. Select Reset Front Panel Setup, then press the OK button.
4. Select Reset Front Panel Setup NOW, then press the OK button.
Resetting Printer Controls Setup Values
Resetting the Printer Controls values resets the Startup Page, Power Saver Timeout,
and Power Saver settings.
1. From the Main menu, select Printer Setup, then press the OK button.
2. Select Printer Controls, then press the OK button.
3. Select Reset Printer Controls, then press the OK button.
4. Select Reset Printer Controls NOW, then press the OK button.

Fuji Xerox Phaser 5500 Specifications

General

Brand	Fuji Xerox
Model	Phaser 5500
Category	Printer
Language	English