FRU Disassembly 8-25
5. Remove the Tray 2 Feeder (page 8-20) or Tray 3 Feeder (page 8-21).
PL2.3.14
6. Release the hooks securing the Sensor to the Upper Frame as shown in the figure.
7. Disconnect the connector from the No Paper Sensor.
8. Remove the No Paper Sensor.
Tray 2 and 3 Level Sensor Actuator
1. Remove the Tray 1/MPT Rear Cover (page 8-16).
2. Remove the Tray 1/MPT Feeder (page 8-32).
3. Remove Door A (page 8-46).
4. Remove the Take Away Bracket (page 8-40).
No Paper Sensor
Upper Frame
Harness
Feeder
s5500-109
Hooks
To Next Page
Loading...
