Fuji Xerox Phaser 5500 User Manual

Reference A-9
Service Diagnostic Tests and Utilities
These descriptions cover each grouping listed in the Service Diagnostics menu.
Described within each group are special instructions, conditions, or other information
necessary to successfully run individual tests or utilities and interpret the results.
Similar tests or utilities are grouped together for convenience. The
"Service
Diagnostics Menu Map" on page A-4 lists all the tests and utilities as they appear on
the display. When attempting to test a device that is not installed the “Option Not
Installed” message appears.
General Status Menu
The General Status menu provides a number of status queries about the printer and
any installed options. These values are read-only and cannot be changed.
General Status Utilities
Utility Action/Requirement
Printer Version Displays code version and release data stored in the Print Engine.
Duplex Version Displays code version and release data stored in the Duplex Unit.
Exit Version Displays code version and release data stored in the Exit 2 Module.
Tray 4-5 Feeder
Version
Displays code version and release data for the 1000-Sheet Feeder.
Finisher Version Displays code version and release data stored in the Finisher.
Tray 6 Feeder Version Displays code version and release data for the 2000-Sheet Feeder.
Total Print Count Displays the number of prints made since the printer’s activation.
Transfer Roller Count Displays the total count through the Transfer Roller since last reset.
Drum Cartridge Count Displays the total count of the Drum Cartridge.
Drum Cartridge Cycles Displays the Drum Cartridge total cycle count (240,000 max.). The
value updates each 154 cycles.
Tray 1/MPT Feed
Count
Displays the number of sheets fed since the last Fuser reset.
Tray 2 Feed Count Displays the number of sheets fed since the last Fuser reset.
Tray 3 Feed Count Displays the number of sheets fed since the last Fuser reset.
Tray 4 Feed Count Displays the number of sheets fed since the last Fuser reset.
Tray 5 Feed Count Displays the number of sheets fed since the last Fuser reset.
Tray 6 Feed Count Displays the number of sheets fed since the last Fuser reset.

Fuji Xerox Phaser 5500 Specifications

General

Brand	Fuji Xerox
Model	Phaser 5500
Category	Printer
Language	English