Fuji Xerox Phaser 5500

5-6 Phaser 5500 Printer Service Manual
Fusing
■ A cold environment affects the warm-up time, while high humidity has an
adverse effect on the fusing of prints.
■ The paper weight or composition or transparency affects the fusing of prints.
Fusing Errors Troubleshooting Procedure
Actions and Questions Yes No
Rub the image three times at the marked check points with a
soft cloth or tissue. The image should not lift off of the
surface.
Does the fusing quality of the image appear acceptable?
Go to
"Resolution"
on page 5-7.
Go to
"Unfused
Image" on
page 5-30.
s5500-049
Test Print
Test Print
Phaser5500-040302-2-L
Phaser5500-040302-2-L
8.5x11 (LEF Only)
8.5x11 (LEF Only)
LEAD EDGE