Fuji Xerox Phaser 5500 User Manual

1-16 Phaser 5500 Printer Service Manual
Custom Width /
Custom Height
89–297 mm (3.50–11.70 in.)/
98–127 mm (3.87–5.00 in.)
■
▲
89–297 mm (3.50–11.70 in.)/
127–182 mm (5.00–7.16 in.)
■
▲ ▲
89–140 mm (3.50–5.50 in.)/
182–432 mm (7.16–17.00 in.)
■
▲ ▲
140–182 mm (5.50–7.16 in.)/
182–432 mm (7.16–17.00 in.)
■ ■ ■
▲ ▲
182–210 mm (7.16–8.27 in.)/
182–432 mm (7.16–17.00 in.)
■ ■ ■
▲ ▲ ▲
210–297 mm (8.27–11.70 in.)
182–432 mm (7.16–17.00 in.)
■ ■ ■
▲ ▲ ▲ ▲
Envelope Custom Width /
Envelope Custom Height
148–241 mm (5.82–9.50 in.)/
98–162 mm (3.87–6.38 in.)
■
▲
Paper Weight
60–105 g/m
2
(16–28 lb. Bond)
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
105–120 g/m
2
(28–32 lb. Bond)
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
120–176 g/m
2
(32–47 lb. Bond)
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
176–215 g/m
2
(47–57 lb. Bond)
▲ ▲ ▲ ▲ ▲ ▲ ▲
Paper Sizes and Weights (Continued)
■ User-Selected Size
● Auto-Sensed Size
▲ Supported
◆ Supported only when Long-Edge Feed
Input Output
Tray 1/MPT Tray 2 Tray 3-5 Tray 6 Envelope Tray 2-Sided Printing Standard Output Tray Stacker Upper Tray Stacker Lower Tray Holes Punched Staple
Depending on your region, finishers are
configured with either a 3-hole punch or a
2-hole and 4-hole punch.
These custom widths are supported with
stapling and hole punching: 210 mm (8.27
in.), 257 mm (10.12
in.), 297 mm (11.70
in.), 8.50 in. (216 mm), 10.50 in. (267
mm),
11.00 in. (279 mm).

Fuji Xerox Phaser 5500 Specifications

General

Brand	Fuji Xerox
Model	Phaser 5500
Category	Printer
Language	English