Fuji Xerox Phaser 5500

Index Index-5
Feed/lift Motor
operational description
, 2-28
part number
, 9-13
removal
, 8-24
testing
, A-12
Feeder
operational description
, 2-28
part number
, 9-13
plug/jack locator
, 10-11
sensor locations
, 2-28
testing
, A-15
wiring diagram
, 10-26
file security
, 6-12
setup
, 6-12
Finisher
, 1-8
AC power connection
, 2-38
Buffer Gate
, 2-9
Buffer Path
, 2-9
Compiler Tray
, 2-9
dimensions
, 1-11
Door F open
, 3-243
Door G open
, 3-245
Door H open
, 3-247
interconnect location
, 1-4
major components
, 2-7
motor tests
, A-14
operational description
, 2-9
option part number
, 9-45
Punch
, 2-9
punch box full
, 3-233
punch box missing
, 3-232
sensor and switch testing
, A-19
Set Clamp Clutch testing
, A-21
set punch configuration
, A-23
solenoid testing
, A-21
Stacker Lower Tray
, 2-9
Stacker Upper Tray
, 2-9
Transfer Gate
, 2-9
Transfer Gate Solenoid
, 2-9
Transport Motor
, 2-9
Finisher LVPS
testing
, 4-6
firmware
version information
, A-9
Front Door Interlock
location
, 2-13
part number
, 9-5
printer front door is open
, 3-235
removal
, 8-10
wiring
, 10-21
Front Panel
brightness
, 6-11
buttons
, 1-5
contrast
, 6-11
error messages
, 3-15
harness part number
, 9-5
language
, 6-11
LED indications
, 1-5
lockout
, 6-11
part number
, 9-5
removal
, 8-90
service shortcuts
, 3-13
setup
, 6-11
testing
, 4-4
Toner Gauge
, 1-10
wiring diagram
, 10-32
Fuser
, 2-3
change setting
, 6-8
components
, 2-21
control temperatures
, 2-25
default temperatures
, 6-8
Exit Sensor
, 2-22
wiring
, 10-22
failures
, 3-27
fan failure
, 3-32
fault conditions
, 2-23
harness part number
, 9-43
Heat Roller
, 2-21
Heater Rods
, 2-22
location
, 1-10
operating modes
, 2-23
operational description
, 2-21
part number
, 9-35
performance evaluation
, 5-6
plug/jack locator
, 10-8
Pressure Roller
, 2-21
print life
, 1-10
removal
, 8-76
set temperature
, 6-8
Fuser (cont.)