Fuji Xerox Phaser 5500

Index Index-13
Transfer Roller, 2-3
circumference
, 5-37
location
, 1-10
operational description
, 2-16
part number
, 9-25
removal
, 8-44
Tray
capacities
, 1-14
Feeder plug/jack locator
, 10-11
Front Panel prompt
, 6-10
jam errors
, 3-9
media specifications
, 1-15
paper level detection
, 2-15
paper size detection
, 2-14
part number (universal tray)
, 9-9
sequencing
, 6-10
set default destination
, 6-10
set default source
, 6-10
Standard Output
, 2-8
supported envelopes
, 1-14
supported paper weights
, 1-14
Tray 2-3 Feeder
, 2-28
Tray 2-3 sensors
, 2-28
Tray 4-5
, 1-7
Tray 6
, 1-9
Tray 6 undocked
, 3-236
universal feeders
, 2-28
universal tray paper handling
, 2-7
universal trays
, 2-27
Tray 1/MPT
, 2-6
Cam Gear Spring
part number
, 9-19
removal
, 8-36
components
, 2-26
Drive Roller
, 2-26
Feed Roller
, 2-6
part number
, 9-19
removal
, 8-38
Feeder
, 2-26
part number
, 9-17
No Paper Sensor
connector designator
, 10-3
location
, 2-26
part number
, 9-17
removal
, 8-34
testing
, A-15
Tray 1/MPT (cont.)
operation description
, 2-26
Paper Size Sensor
, 2-26
testing
, A-15
parts
, 9-16
Pick Up Gear Spring
part number
, 9-17
removal
, 8-35
Pick-up Solenoid
, 2-6
location
, 2-26
part number
, 9-19
removal
, 8-36
testing
, A-20
plug/jack locator
, 10-9
removal
, 8-32
Retard Pad
part number
, 9-19
removal
, 8-39
Retard Pad Spring
part number
, 9-19
removal
, 8-39
sensor tests
, A-15
Tray part number
, 9-21
wiring diagram
, 10-28
Tray 2-3
Feed Out Sensor #3
part number
, 9-31
removal
, 8-54
Feed Roller
removal
, 8-29
Feed/lift Motor
location
, 2-28
part number
, 9-13
removal
, 8-23
Feeder
components
, 2-28
feed operation
, 2-28
removal
, 8-20
sensors
, 2-28
Level Sensor
, 2-29
part number
, 9-13
removal
, 8-27
No Paper Sensor
, 2-29
part number
, 9-13
removal
, 8-24