J
Assigning multiple samples
If you have loaded a number of different samples into
SAMPLE TRANSLATOR then you will need to use the ASSIGN
MENU to map your samples to specific areas of the keyboard.
Use the dial to set the lowest note that you want the
currently selected sample to play.
Once youve assigned the lower note limit, move the cursor
to the upper note by pressing the right arrow and then
assign this in the same way. Then press ENTER.
Now use the arrow keys to select another sample in the
list. Press the right arrow to set the lower note and proceed
as before. In this same way, you should set a note range
for every sample in your list.
You must assign unique regions of the keyboard to each
sample in your list before you will be able to save your
sound. Regions cannot overlap. You can continually test
your assignment setting by playing on the keyboard while
youre in the ASSIGN window. When youve finished
assigning all samples in the list, press ESCAPE to return
the main Sample Editor screen.
If you assigned every sample correctly then you should see
that range of assigned notes appears next to the name of
each sample. If you wish to change any of these
assignments, you can select and change the notes here
without returning to the ASSIGN window,
To Next Page
Loading...
Need help?
General
