Exhaust System
F-9
Exhaust System
Inspection of Exhaust System
1. Start engine to inspect leakage of exhaust gas pipeline
l If there is any leakage, check and replace as required.
Exhaust System Removal/Installation
Warning
l As hot engine and exhaust system components may cause scalding, any removal operation should
be conducted with engine cooled down.
1. Disconnect negative battery cable.
2. Remove system with sequence indicated in the figure.
3. Install in reversed order of removal.
1 Auxiliary silencer assembly
2 Main silencer assembly
3 Front exhaust pipe protector assembly
4 Rear three-way catalytic converter assembly
5 Oxygen sensor
6 Front exhaust pipe assembly
7 Front hanger
8 Front three-way catalytic converter
9 Rear hanger
To Next Page
Loading...