Clutch Master Cylinder
H1-3
Clutch Master Cylinder Disassembly/
Assembly
1. Remove in order 1-2-3-4-5 as shown in
the diagram.
2. Separate the piston split washer and
cylinder with slotted screwdriver in the
removal of piston assembly.
3. Install in reverse order as of removal.
1 Clip
2 Clip
3 Fluid Reserve Pipe
4 Split Washer
5 Piston
6 Bush
7 Return Spring
8 Gasket
9 Clutch Master Cylinder
Clutch Slave Cylinder
Clutch Slave Cylinder Removal/
Installation
1. Disassemble in order 1-2-3-4 as shown in
the diagram.
2. Install in reverse order 4-3-2-1 as of
removal.
1
Hexagon Flange Bolts
2
Hexagon Flange Bolts
3
Coupling Nut
4
Clutch Slave Cylinder
Tightening Torque:18N·m~28 N·m
Nominal Value 22 N·m
Tightening Torque:16N·m~21.75 N·m
To Next Page
Loading...