External accessories
S-24
External accessories
Disassembly/assembly of front wall grille
1. Remove the windshield wiper arm and wiper
blade (See Part T——Disassembly/assembly
of Wiper and Washer, Windshield Wiper
Arm and Wiper Blade)
2. Remove the front wall grille as per the order
set out in the Table.
1 Snap A
2 Trim cover of front wall grille
3 Snap B
4 Screw and screw cap
5 Front wall grille
3. Install as per the reverse order with that of
the removal.
Disassembly/assembly of air exchange
chamber
1. Remove the rear bumper (See——Bumper,
Disassembly/assembly of Rear Bumper)
2. Compress with fingers the clamp A, remove
the air exchange chamber from the side of
vehicle.
3. Install as per the reverse order with that of
the removal.
Disassembly/assembly of rear plastic
cement mudguard
a) Remove the fastening bolt as per the order
set out in the Table;
b) Remove the mudguard;
c) Install as per the reverse order with that of
the removal.
Disassembly/assembly of rear wheel
mudguard
1. Remove the rear plastic cement mudguard
(See—Disassembly/assembly of Rear Plastic
Cement Mudguard)
2. Remove the screws and snaps as per the
order set out in Fig.;
3. Remove the mudguard.
Vent cavity
Snap A
To Next Page
Loading...