Bumper
S-23
Disassembly/assembly of rear bumper
1. Disconnect the negative cable of battery;
2. Remove the rear bumper mudguard (See Part
TāāDisassembly/Assembly of Rear
Bumper Mudguard)
3. Dismount as per the order as indicated in the
table;
4. Disconnect the reversing radar harness of
rear bumper;
5. Install as per the reverse order with that of
removal.
1 Self-tapping screws
2 Flange nut
3 Self-tapping screws
4 Plough bolt
5 Claw
6 Self-tapping screws
Disassembly/assembly of rear bumper
1. Disassembly as per the order as indicated in
the table;
2. Assembly in the reverse order with that of
disassembly.
1 Reversing radar harness
2 Reversing radar
Detailed description of rear bumper
removal
Instructions of reflector removal
Compress the hook while drawing the reflector
on the bumper
Hook
To Next Page
Loading...