Ignition and control systems
25
Disassembly/assembly of control system parts
1. Disassemble as per the order shown in Fig.
2. Assemble in the reversing order of disassembly.
1
Crankshaft position sensor
(See——Check of Crankshaft Position
Sensor)
2 Oil control valve
3
Water temperature sensor (See——
Instructions of Removal and
Installation)
4 Knock sensor
5 Injector
6 Fuel rail
7 Electronic throttle body
8 Cam position sensor
*Note 1: This part has only listed the installations all parts of control system on the engine. The
relevant diagnostics and checks are referred to the corresponding part of CBU.
To Next Page
Loading...