Power door lock system
S-18
Back door
Disassembly/assembly of back door
Warning:
l It is dangerous to dismount the back door without support;
The back door is likely to drop down and hart your body. After completely opened and propped up the
back door, two persons at least shall be work together;
1. Disconnect the negative cable of battery;
2. Dismount as indicated in the following Table;
3. The installation is in the reverse order with the removal;
4. Adjust the back door (SeeāāAdjustment of Back Door).
1 Washer hose of back door glass
2 Bolt (gas spring)
3 Nut
4 Mounting bracket
5 Back door
To Next Page
Loading...